Commodore C-NET 128 v7.0 User Manual page 68

itself, there will be a direct jump
command for the different tests which trigger
#nn Print a number of blank lines/carriage returns.
#on Toggle the flash mode on or off (1=on
with true
ASCII modes.
#pn Change the screen print mode to one of the following:
0 - Normal output
1 - Print letter, backspace, then print letter again
2 - Print letter, run 8 spaces out then back space to the
letter again
3 - Print letter, backspace over it
4 - Print letter, backspace, print letter
5 - Print letter, run line, backspace, print next letter.
NOTE: These codes cause all sorts of delays, and should not be used
in the subboards.
#qn Cancel all MCI codes currently in memory.
text print.
#rn Toggle reverse video. (1=Rev on
single line
want this effect to appear on.
this mode.
#sn Change the screen print output speed.
a delay of
#tn Used to test variables (tests to be used with the Jump
routines and Labels)
1.
sign to
beginning with the letter a,
2.
will
line with. '@'
through 'o' represent the
jumps to label A if the user on-line is
7.
3.
display
Example; System
displayed to the users who
4.
screens
sys.welcome).
graphic will be displayed, if not,
line is possible for ANSI and ASCII users.
5.
80
column is in use.
test for true CG mode to add
graphics or NOT as the case may be.
#un Toggle underline mode on and off (1=on
128
#vn Prints out variables currently in memory as specified by the
number as
0.
128 graphics terms.
of text.
A
1/20th of a second between each character printed.
(an$) Testing for 'an$' must end with an additional pound
mark it's end (i.e., '#t1a#' tests for an$
Access group test.
indicate the access group to compare the user on-
Sysop access. This is used in menus, etc., to only
Test for true CG mode.
and pure text screens in a single MCI file (such as
Test for 80 column mode.
column, and allows a jump to another line if 40
graphics mode only.
listed below:
Current date and time.
without a test.
Will not work with ANSI or
2=Rev off).
Must be entered on each line you
carriage return auto cancels
The character following the number 2
represents group 0, lower case letter 'a'
others.
commands and such to the Sysop group.
Maintenance commands will not be
don't have that access.
Allows you to place color graphics
If the test for CG mode is true, the
Will test the users system for
Can be used in conjunction with the
See the '#tn"
a jump.
2=off). This only works
Return to normal
Only good for a
Each number over 0 adds
etc.).
Example; '#t2g#EA
access group
a jump to a pure text
additional text and
2=off). Works in true