Edit Modem Strings - Commodore C-NET 128 v7.0 User Manual

8-bit home computer
Table of Contents

Advertisement

10)
Printer Secondary (address) – This is usually 7, but check your
printer interface instructions to be sure.
11)
Modem Type -- Set according to the following list:
12)
Idle Baud Rate -- Baud rate at which the computer should
conduct
waiting for a call.
modem that you are using.
13)
Default Text Color -- A color code (0 to 15) for color of all
system
against using 0 (black) as a
14) Drive Secondary Address -- When writing to files, 1571's tend to
write faster (when writing to the backside with the old bug-
filled ROM's) with a secondary address of 1.
don't mind this 1.
with a secondary address of 1, so you must change the 1 on this
line to a 2 if you are using the Lt. Kernel.
15) Network/Amaint Hour -- This is the time of day (in military
time, 0 is midnight, 12 is noon, etc.) that auto-maintenance
will occur.
18.
16)
2400 Baud Fine Adj – Only necessary for modem types 0-4
16) Real-Time Clock –
17) System Hard Drive – 0=NONE, 1=CMD HD, 2=Lt. Kernel
18) Expansion RAM – 0=NONE, 1=1700, 2=1750
When you have finished this screen, press ESC.

4.5.4 EDIT MODEM STRINGS

INITIALIZATION STRING
Build a modem initialization string with the following elements.
Refer to your modem manual to verify correct commands.
EO - Echo OFF
(0)
Mitey Mo, Hesmodem II
(1)
1650, Westridge, Total Telecommunications, Video 7
(2)
Hayes compatibles (extended return code set and
verbose mode must be supported).
ring, sends ATA, then waits for a connect code --1
for 300 baud, 5 for 1200 baud, or 10 for 2400 baud.
"+++" and ATH are sent to hang up.
for DTR exists, set it for always on (true).
(3)
Commodore 1670 (this modem does not support ATA while
the phone is ringing -- so must always be set to auto-
answer mode.)
(4)
A Hayes compatible (type 2) modem with DTR (Data
Terminal Ready) control ability for fast hang-ups.
The RS-232 interface must also support the DTR pin
connection to the modem.
exists, set it for line signal (not always on).
dip switch exists on any
detection), insure that it is set for line signal
(not always on).
(5)
Swiftlink/Turbo232 Cartridge
conversation with the modem while the system is
prompts and status displays.
Lt. Kernel hard drives will not function
Auto-maintenance is described more fully in chapter
If a dip switch for DTR
This means, the maximum baud rate of the
default text color.
C-NET waits for a
If a dip switch
modem for CD (carrier
I would suggest
Most other drives
non-
If a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-NET 128 v7.0 and is the answer not in the manual?

Questions and answers

Table of Contents