Commodore C-NET 128 v7.0 User Manual page 88

G Net-News Parameters:
down a news file, or varying subjects, and this is where you will have
access to reading it,
'normal' news routines.
H System Tagline:
version of Multi-Net, however, it is here for future expansion.
refer to the section
for more information on
1-24 The numbers side of the screen is for setting up what hours you wish
to have Multi-Net take the BBS down to compile messages.
wish for Multi-Net to compile during a certain hour, type that number to
toggle it off. For
anything but save messages to
hours, and compile the messages going out
'smart' enough to do that, if you wish.
19.8 GENERAL NETWORK COMMANDS IN SYSTEM MAINTENANCE
NL Net Log: Will display a concise report on the activities of the
Network, specifically, its calling out and receiving activity.
number of posts/responses,
updates, connect and disconnect
displayed from this command.
NC Net Connections:
follow with
explained. The most
connections, is that your previous
connection you have listed in the 'NC' command.
decide which of your connections you want to edit.
the same way, so just which one to edit is not important.
new systems, this is a moot point, as they will only have one connection to
begin with.
could land up
connection form the list by
for you. Each parameter on the
number, with the exception of the right side of
soon). If you wish to have another connection there, select
and when prompted for a new system ID, enter the 4 letter ID of the
new system (or, to kill this connection, enter 'KILL').
will ask if
of the commands that
need no real explanation other
Password:
other
pass messages onto
other connections will need
Flags:
used for Multi-
future expansion.
files, or a two way transfer on the same call.
system is designed to help cut costs for all users, and is
Occasionally, the Node Administrator will send
and whether or not it is recurring, etc., as in the
At the present time, this option is not used by this
dealing with setting up your networked message bases
use of taglines.
example, you may not wish to have the network do
and number of private message traffic, map
This command is rather long, and you may wish to
your system running to follow along as each option is
important thing to remember about your net-
However, if the network were to expand quickly, then you
with as many as four connections.
number, and in a moment, it will be displayed
you would like to load new parameters for that node.
follow it (numerically) are self-explanatory, and
This is the password that you will need to get from the
connections you have, so they will be able to
At the present, only three of the twelve flags are
The first
its temporary files during prime time
after midnight.
times for each system, will also be
connection MUST be the first
edit connection screen is edited by
than the following:
your system.
your password as well.
Net. The remaining are in-place for
Please
If you do NOT
Multi-Net is
The
The first thing to do is
Each one is edited
For most
Simply select a
the screen (covered
option one,
The program
At the same time, the
flag is for Sendback-
Each
This