folder.
If you answer "Yes" an exact copy of your message is saved to your
Sent Mail folder for later review or forwarding.
returned to the main level of the current mailbox.
10.9
SENDING A FILE
The flow of Sending a File is basically the same as Composing a message
except after you are prompted for a Return Receipt you are then placed into
upload mode.
In upload mode you are basically supplying the system with the necessary
information it needs to receive the file.
You will be prompted for a "Filename to Attach?"
system will ask the file type; "S" for a sequential (text file) or "P" for
a program (binary file).
Next you will have the option to select and upload protocol, abort the
transfer or begin uploading.
LEVEL of the current mailbox.
you will have the opportunity to select a new one from the possible
alternatives (New Punter, X-MODEM, X-MODEM CRC, X-MODEM 1K, Y-MODEM or
ASCII).
If you select to begin the transfer the system will tell you when
to begin sending the file.
will be saved to the E-MAIL DISK on the system to await download by the
recipient.
10.10 DELETING MAIL
The 'K' command may be used to delete all of your messages.
message may be deleted by appending a message number to the end of the 'K'
command.
For example, the command "K 1" would kill message number 1.
10.11 ELECTRONIC MAIL MAINTENANCE
System Operators may access Electronic Mail Maintenance by going to System
Maintenance and selecting the "EC" option; Electronic Mail Controls.
There are currently two options available in Electronic Mail Controls; E-
Mail Configuration and Pack Up E-Mail.
10.11.1
E-MAIL CONFIGURATION
Before anyone can use Electronic Mail in V7 the E-Mail Configuration
program must be run.
define which specific options he/she wants allow his/her users access to.
Following is a list of the configurable items:
Enable/Disable Electronic Mail
Allow/Deny Return Receipts
Allow/Deny File Attachments
Message Limits
In-Box Limit
Sent Mail Limit
Archive Limit
Allow/Deny Personal Address
If you abort you are brought back to the MAIN
If you select to change the current protocol
After a successful upload your file and message
E-Mail Configuration allows the system operator to
mail subsystem.
Can users request return receipts or not.
Can users send file attachments
How many messages are allowed?
How many messages are allowed?
How many message are allowed?
Can users have Personal Address Books?
Otherwise, you are
After the filename the
Ability to shut down the entire e-
Any specific
Need help?
Do you have a question about the C-NET 128 v7.0 and is the answer not in the manual?
Questions and answers