Setup Logs - Danfoss AK-CC 750 series Manual

Setup logs

Go to the overview
1.
Press the blue overview button with the log symbol.
Log display
2.
3. New logs
Press the +-button to go on to the next page
Selection of parameters
4.
Press the +-button to go on to the next page
66 RS8GM222 © Danfoss 10-2014
The top line gives access to definition of new logs and to
changes of already established logs.
The next line enables you to see a selection of the defined logs
Here is the start display for new logs
Start by defining which type of log has to be defined
Here it is determined which parameters have to be included in
the setup of data. Select a function here, then a parameter, and
finish with OK.
AK-CC 750 - 080Z0130 & 080Z0139