Download Print this page

Data Logging - Extech Instruments CO210 User Manual

Co2 monitor and datalogger
Hide thumbs Also See for CO210:

Advertisement

Operation
POWER ON
Plug in the adaptor and the meter turns on automatically with a short beep. If the voltage is
too high or low, "bAt" will display on the LCD and an LED will flash.
The LCD will display current CO
displayed as well
TAKING MEASUREMENT
The meter starts measurements when powered on and updates readings every second. If the
operating environment changes (ex. from high to low temp.), it takes 2 minutes for the CO
to respond and 10 minutes for RH change.
NOTE: Do not hold the meter close to your mouth or any other source of CO
MAX/MIN
In the normal mode, press the MIN/MAX button to see the minimum and maximum of CO
Temperature and Humidity. Each press of MIN/MAX button will sequence through the MIN, MAX
display and then returns to normal mode.
Press and hold the RESET button for more than 1 second to clear the minimum and maximum
value from memory.

DATA LOGGING

The meter can record readings of CO
monitoring. The memory capacity is 15999 points (5,333 RH, Temperature and CO
The sample rate is adjustable from 1 second to 4 hours 59 minutes and 59 seconds.
After the sampling rate is selected, press the LOG button for 2 seconds in the normal
mode to start logging. The green LED light blinks to indicate the logging status and the LCD
main display will alternate between real time CO
the real time temperature, humidity and clock.
To terminate data logging, press the ESC button" for 2 seconds. The LED will stops blinking
and the LCD main display will alternate between real time CO
the ESC button for 2 seconds again and it the meter returns to normal measurement mode.
Minimum and Maximum recall continues working during logging.
The memory is cleared whenever a new logging session is activated.
www.ponpe.com
, temp., humidity, date and time. The air quality level is
2
, temperature and humidity for long time environment
2,
value and "rEC". The lower displays are
2
3
.
2
2
value and "End". Hold down
2
CO210-en-EU_V1.2 8/14
contact:
sale@ponpe.com
sensor
2
,
2
records) .

Advertisement

loading
Need help?

Need help?

Do you have a question about the CO210 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

793950502105