Extech Instruments CO210 User Manual page 6

P4. RESET
0
Press the LOG/▲button in P1.
Press the SET button and the meter will go to P4.
switch the status then press either the SET button to save the settings or the ESC button to
exit without saving the settings.
If "Yes" is selected the meter defaults to the following settings:
P5. SAMPLING RATE
0
Press the LOG/▲button in P1.
available range is 1 second to 4 hours 59 minutes. Press the SET button and the meter will go
to P5. with blinking hour digits. To change the hour, press the LOG/▲ button or the MIN/MAX▼
1
button. Press the SET button to save the setting and then repeat the procedure for P5.
P5. seconds Press the ESC button return to P5.
3 .
www.ponpe.com
three times to access P4.
0
Parameter
P1.
1
P1.
2
P1.
3
P2.
1
P4.
1
three times to access P5.
0
Year Month Date
Hour Min
to reset the meter to default settings.
0
with a blinking "No". Press the LOG/▲ to
1
Default
700ppm
1000ppm
1000ppm
C
°
No
to set the logging sample rate. The
0
without saving the setting.
0
Year Month Date
Hour Min
6
minutes and
2
CO210-en-EU_V1.2 8/14
contact:
sale@ponpe.com