Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Extech Instruments CO210
Summary of Contents for Extech Instruments CO210
- Page 1 USER MANUAL Monitor and Datalogger Model CO210...
- Page 2 The included Windows-based software and USB cable allow you to set up the datalogger and transfer logged data to your PC. The CO210 is an ideal instrument for indoor air quality (IAQ) monitoring. The CO210 is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
-
Page 3: Operation
AC power source, the meter will switch ON. The front panel LED power indicator will light, and the beeper will sound. If the power source voltage is incorrect, ‘bAt’ will display, and the LED indicator will flash. Do not use the CO210 with an incorrect power source. -
Page 4: Alarm Function
USB driver is also available from the Extech website. Connect the CO210 to a PC using the supplied USB cable. The USB port is located on the back of the CO210. Install the software, open it, and refer to the program HELP utility for complete operational information. - Page 5 . Press SET again to continue Press ESC to exit without saving. Caution: Set the alarm value within the specified range of the CO210 where accuracy is assured. Out of specification readings are for reference only. P2.0 Temperature Units Press the ▲ button in P1.
- Page 6 Press SET and the meter will access P4.1 with a blinking “No”. Press the ▲ to switch the status to ‘Yes’ and then press either the SET button to confirm and continue or the ESC button to abort the process. CO210-en-US v1.3 1/21...
- Page 7 (power on). It assumes that the area being tested receives fresh air with a CO level of approximately 400ppm at some point during the monitoring period. Note that It is not suitable to use the CO210 in closed areas with consistently high CO levels 24 hours a day. Manual CO...
-
Page 8: Specifications
To download logged readings, use the latest Windows- based PC software and USB driver from the Extech website. USB cable is included with the CO210. Operating Conditions 14 to 140°F (-10 to 60°C); < 90% RH non-condensing Storage Conditions -4 to 140°F (-20 to 60°C);... -
Page 9: Troubleshooting
Same as EO2. range (high). Sensor malfunction. Return for repair. Humidity Display Code Temperature display shows error. Refer to temperature error codes. RH calibration failure. Please return for repair. RH sensor circuit failure. Please return for repair. CO210-en-US v1.3 1/21... -
Page 10: Two Year Warranty
Contact Customer Support Customer Support Telephone List: https://support.flir.com/contact Calibration, Repair, and Returns: repair@extech.com Technical Support: https://support.flir.com Copyright © 2021 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form www.extech.com CO210-en-US v1.3 1/21...
Need help?
Do you have a question about the CO210 and is the answer not in the manual?
Questions and answers