Advertisement
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor's drive IC on the PCB might be out of condition.
8. Fixture Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning
frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the fixture's optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
13-
TABLE OF CONTENTS
1. Safety Instructions
2. Technical Specifications
3. Installation
4. DMX512 Address setting
5. How to control the fixture
6. DMX 512 Connections
7. Troubleshooting
8. Fixture Cleaning
2-
Advertisement
