Advertisement
back to the functions press the MENU button again.
Channel mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
or
(channel 2) or
(channel 3) mode. Once the mode has been selected,
press the ENTER button to setup or automatically return to the main functions without any
change after 8 seconds. To go back to the functions without any change press the MENU
button again.
Slave Mode
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or
(16 light show) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
Show Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
or
(show 5) or
(macro) or
selected, press the ENTER button to setup or automatically return to the main functions
without any change after 8 seconds. To go back to the functions without any change press
the MENU button again.
Blackout Mode
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(yes blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
is showing on the display. Pressing ENTER
(channel 1)
is showing on the display. Pressing
is showing on the display. Pressing ENTER
(show 1)
(fade) mode. Once the mode has been
is showing on the display. Pressing
7-
Led Display
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(Led on) or
(Led off) mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the MENU button up to
when the
is blinking on the display. Use the ENTER button to change to the mode
(display normal), It will automatically store after 8 seconds. Or press the ENTER
button again return to the mode
press the MENU button.
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Fixture Hours
Press the MENU button up to when the
button and the display will show the number of working hours of the unit. To go back to the
functions press the MENU button again.
Software version
Press the MENU button up to when the
button and the display will show the version of software of the unit. To go back to the
functions press the MENU button again.
4.2 DMX Address Setting
A. Automatic DMX-addressing
1.
The DMX address of fixture can be set automatically. You have to press the
button from the first fixture and hold for 5secs, the DMX start address of it will be set to
1, and the other fixtures of the chain will be set their own DMX start address
automatically.
2.
The LED fixtures use four channels, the next fixture's will be automatic calculate their
is showing on the display. Pressing
(display inversion). To go back to the functions
is blinking on the display. Pressing ENTER
is blinking on the display. Pressing ENTER
8-
Advertisement
