Setting The Lock - Hitachi EP-NZG70J Instruction Manual

Table of Contents

Useful Features

Setting the Lock

 Prevents accidental operation by children through restricting the operation.

 This can be set while the unit is operating.

The same process goes for unlocking the unit.

Long-press

After long-pressing

child lock indicator will lit.

To cancel the child lock, long-press

twice (beep, beep), and the child lock will be canceled.

Each time

The light will go off when the child lock is canceled.

Note

 After setting "Lock", no other buttons can be used except the

 In the event of a power interruption, restoring the power does not deactivate the child lock setting, even after

pressing the

and cancel the settings.

E-20

EP-NZG70J_EN.indd 20

for about 3 seconds

Lock

for about 3 seconds, a buzzer will ring once (beep) and the

Indicator

is long-pressed for about 3 seconds, the child lock be set or cleared.

power button and after removing the power plug from the outlet. Hold

(Continued)

for about 3 seconds. Then the buzzer will ring

power button and

for 3 seconds

6/30/2017 10:32:31

Table of Contents