Hitachi EP-NZG70J Instruction Manual page 15

Install the pre-filter to the unit
4
Securely plug the tabs of the pre-filter to the matching holes in the unit.
Slide the switch downwards (2 locations) to lock.
Gently pull the pre-filter to make sure it is not out of place.
Plug the tabs of the pre-filter
Attach the rear panel to the unit
5
Plug the tabs (2 locations) of the
upper part of the rear panel to
the matching holes in the unit.
Gently push the bottom sides of
the panel one after another, and
close it securely until it clicks.
EP-NZG70J_EN.indd 15 EP-NZG70J_EN.indd 15
Tab
Switch
Insertion hole
Insert to the hole
Slide the switch downward.
Pre-filter
E-15
6/30/2017 10:32:30 6/30/2017 10:32:30