Setting The Child Lock; Making The Flap Swing - Hitachi EP-PF120J Instruction Manual

Setting the Child Lock

 Prevents accidental operation by children through restricting the operation.
 This can be set while the unit is operating.
The same process goes for unlocking the unit.
1
Touch and hold
After touching and holding
the child lock indicator will light up.
To cancel the child lock, touch and hold
ring twice (beep, beep), and the child lock will be canceled.
Each time
The indicator will go off when the child lock is canceled.
Note
 After setting the child lock, no other buttons can be used except
 In the event of a power interruption, restoring the power does not deactivate the child lock setting, even after
touching the
cancel the settings.

Making the Flap Swing

Touch
The flap starts swinging.
Note
 Do not move the automatic fl aps with your hands.
Doing so may cause them to move incorrectly.
If you accidentally move them with your hands and they
move incorrectly, stop operation with the power button,
wait about 25 seconds, and start operation again.
 This is disabled while the unit is in "child lock".
EP-PF120J_EN.indd 21 EP-PF120J_EN.indd 21
for about 3 seconds
for about 3 seconds, a buzzer will ring once (beep) and
is touched and held for about 3 seconds, the child lock be set or cleared.
power button and after removing the power plug from the outlet. Hold
for about 3 seconds. Then the buzzer will
, , and child lock operations.
The Swing indicator will light up.
Indicator
The setting switches on and off every time you
touch the button.
Swing Off
When swinging is canceled, the flaps open facing upward.
CAUTION
Do not insert your fingers or other long objects into the air outlet.
Otherwise, it may cause injury or malfunction.
Do not touch the automatic flaps while they are swinging.
Otherwise, your hands may get caught.
Indicator
for 3 seconds and
E-21
2/11/2019 3:36:26 PM 2/11/2019 3:36:26 PM