Installing The Timing Belt On The Extension; Installing The Timing Belt - HP StorageWorks MSL6000 Series Reference Manual
Pass-through mechanism, tape library
Hide thumbs
Also See for StorageWorks MSL6000 Series:
- User manual (182 pages) ,
- Quickspecs (18 pages) ,
- Setting up (6 pages)
Table of Contents
Advertisement
Figure 20
Installing the timing belt on the extension
Figure 21
Installing the timing belt
CAUTION:
To prevent damage to the PTM media elevator car it must be supported from
underneath any time you are performing procedures on the belt block bracket assembly.
7.
Place the timing belt ends on the belt block (see
8.
Use diagonal cutting pliers to cut the drive belt. If the belt was sized properly, a small space
between the belt ends should be visible.
9.
Secure the timing belt with the two belt brackets and four retaining screws.
Figure
22).
MSL6000 series pass-through mechanism reference guide
29
Advertisement
Table of Contents
