Multi-Unit Library Configuration (Single Master and Slave)
Figure 24
on page 32 shows how to connect a multi-unit library configuration using a single master
and a slave library configuration.
NOTE:
All libraries must be powered off.
NOTE:
Refer to the HP StorageWorks MSL6000 Series Tape Library User Guide for information on
connecting SCSI cables and SCSI terminators to fit your specific needs and for additional multi-unit
library and SCSI configuration information.
Figure 24
10U multi-unit library configuration (single master and slave)
32
Installing the PTM
(Back Side)
WAN
WAN