Intel S2600WF Technical Product Specification page 18

Intel® Server Board S2600WF Product Family Technical Product Specification
Intel® Server
Board Feature
Onboard SATA • 12 x SATA 6 Gbps ports (6 Gb/s, 3 Gb/s and 1.5 Gb/s transfer
rates supported)
o (2) – single port 7-pin SATA connectors
o (2) – M.2 connectors – SATA / PCIe*
o (2) – 4-port mini-SAS HD (SFF-8643) connectors
• Embedded SATA Software RAID
o Intel® RSTe 5.0
o Intel® Embedded Server RAID Technology 2 1.60 with
Riser Card Concurrent support for up to three riser cards
• Riser #1 – PCIe* 3.0 x24 (CPU1 x16, CPU2 x8) – 2 and 3 slot riser card options available
• Riser #2 – PCIe* 3.0 x24 (CPU2 x24) – 2 and 3 slot riser card options available
• Riser #3 (2U systems only) – PCIe* 3.0 (CPU 2 x12) – 2 slot riser card available
Video • Integrated 2D video controller
• 16MB of DDR4 video memory
• (1) – DB-15 external connector
• (1) – 14-pin internal connector for optional front panel video support
USB • (3) – external USB 3.0 ports
• (1) – internal type-A USB 2.0 port
• (1) – internal 20-pin connector for optional 2x USB 3.0 port front panel support
• (1) – internal 10-pin connector for optional 2x USB 2.0 port front panel support
Serial Port • (1) – external RJ-45 serial-A port connector
• (1) – internal DH-10 serial-B port header for optional front or rear serial port support
Server • Integrated baseboard management controller, IPMI 2.0 compliant
Management • Support for Intel® Server Management software
• Dedicated onboard RJ45 management port
• Advanced server management via Intel® RMM4 Lite – iPC AXXRMM4LITE2 (accessory option)
Security • Trusted platform module 2.0 (Rest of World) – iPC AXXTPMENC8BPP (accessory option)
• Trusted platform module 2.0 (China Version) – iPC AXXTPME8BPP (accessory option)
System Fan • (6) – system fans supported in two different connector formats: hot swap (2U) and cabled (1U)
o (6) – 10-pin managed system fan headers (sys_fan 1-6) – used for 1U system configuration
o (6) – 6-pin hot swap capable managed system fan connectors (sys_fan 1-6) – used for 2U system
18
S2600WFT
optional RAID 5 key support
configuration
S2600WF0
• 4 x SATA 6 Gbps ports (6 Gb/s, 3
• Embedded SATA Software RAID
Note: 4-port mini-SAS HD connectors
are present on S2600WFQ but are not
configured as SATA; these cables are
used only for Intel® QAT.
S2600WFQ
Gb/s and 1.5 Gb/s transfer rates
supported)
o (2) – single port 7-pin SATA
connectors
o (2) – M.2 connectors –
SATA/PCIe*
o Intel® RSTe 5.0