System Application Mode - Zte ZXA10 S300 Technical Manual

ZXA10 S300 (V1.1) Integrated Access Service Dispatching Unit Technical Manual
72 Confidential and Proprietary Information of ZTE CORPORATION
2 6 − F
F P
I G U R E R O N T A N E L O F
Blank panel
2 7 − B
F P
I G U R E A C K A N E L O F

System Application Mode

The ZXA10 S300 integrated access service Dispatching Unit is
developed for the unified application of the transmission layer
function and the data service function of the MAN. It can be
integrated with the ZTE data service equipment to provide the
full service networking function of high performance at a low
cost.
The ZXA10 S300 can bear the TDM service (2 M and 34 M),
Ethernet service and ATM service. It can serve as the
independent transmission device, and support the hybrid
networking with the ZXA10 and ZXE10, thus providing an
integrated solution.
At the NNI side, the system provides:
N × E1 interfaces to connect the ZXA10-OLT/OLTB.
Ethernet, POS and ATM interfaces to connect the high-end
UAS, line rate router and ATM switch.
N × E1 interfaces to connect the BSC (2 G).
C C
A S E I N O N F I G U R A T I O N
board/blank panel
board
C C
A S E I N O N F I G U R A T I O N
blank panel
3
3