Function Push Buttons - golmar 50124319 Instruction Manual

132
F
unction push buttons.
In Platea/Tekna Plus:On-Off push button. After any monitor reset and during the next 45
seconds, all the monitor functions will be disabled, with the exception of call reception.
In Platea/Tekna Uno: On-Off light indicator.
If the handset is on the craddle allows the activation of an optional second camera (*).If not,
allows to make an intercom call or to activate the second camera (*).
(Only Platea/Tekna Plus).
If the handset is on the craddle allows the activation of an optional device. If not, allows to
call to a slave porter's exchange (*) or to activate the optional device (*).
(Only Platea/Tekna Plus).
If the handset is on the craddle allows to see the picture from the master door panel. If not,
allows to establish audio and video communication with the door panel that has been
configurated with the autoswitch-on function. This function is disabled if a com-
munication is already established.
If the handset is on the craddle:
Platea/Tekna Plus: sends a panic call to the porter's exchanges that have enabled the
reception of this type of call.
Platea/Tekna Uno: keep pressing this button for 1 second to turn the monitor On/Off.
45 seconds after turning On the monitor only calls will be received.
If not: in both models allows to call to the master porter's exchange. During call reception
and communication progresses activates the lock release.
(*) Second camera activation and call to a slave porter's exchange functions require an internal
modification of the Platea/Tekna Plus monitor. If any of these functions are required, contact with
your nearest authorized distributor.
Second camera activation disables the intercomm function and call function to a slave porter's
exchange disables optional device function.
D
escription of the identification label.
PLATEA UNO
VERSIÓN
X.XX
INTER A1 MASTER SLAVE
ATENCIÓN
Alta tensión. No abrir la tapa. ESCALERA
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
REF.
COD.
11784022
Nº SERIE
00000000000
CODIGO / CODE
PISO PUERTA
Stair Floor Door
MONITOR DESCRIPTION
For an easiest repair, replacement or increasement
of the existing monitors, fill the indentifying label
information.
MASTER: master monitor.
SLAVE: slave monitor.
INTER: slave monitor with intercom function.
A1: monitor connected to an auxiliary device.
CODE: monitor call code (see page 136).
STAIR: building code (see page 120).