Uplc Configuration Report - Ametek UPLC CU44-VER04 Applications Manual

UPLC™ Application Manual
In addition to the settings file that may be saved as an XML file for modification and uploading, there is
a configuration report file that can be saved that records the settings of the UPLC. A typical file looks like
this:
||
Software Revision:
Unit IP:
Date/Time:
System ID (Major):
System ID (Minor):
General Settings
Channel Type:
Function :
Transmit Frequency:
Receive Frequency:
TX Shift-Bandwidth:
RX Shift-Bandwidth:
Tx Shift Up to Trip:
Rx Shift Up to Trip:
Transmit Power Low:
Transmit Power High:
Fade Alarm:
Fade Margin:
Reflected Power Alarm:
Transmitter:
Receiver:
Logic Settings
Voice:
Trip Test:
Pre-Trip Delay:
Trip Hold:
Guard Hold:
Guard Before Trip:
Unblock Timer:
Unblock Delay:
Input Output Settings
Inputs
1. Hold:
Selection:
Active State:
2. Hold:
Selection:
Active State:
3. Hold:
Page 5–8

UPLC Configuration Report

2.00
10.14.3.127
Mon Sep 10 11:20:23 2007
System Identification 1
System Identification 2
FSK
Unblocking - 2F
252.00 Hz
250.00 Hz
600 ± 250
600 ± 250
Disabled
Disabled
1.0 W
10.0 W
10 dB
15 dB
15.0 %
Enabled
Enabled
Beep Disabled
Enabled
2 ms
0 ms
0 ms
Required
0 ms
0 ms
0.0 ms
UB key
Application of Voltage
0.0 ms
Power Off
Application of Voltage
0.0 ms