Gps Compass Calibration - ProFlight ORBIT PFBD201 User Manual

GPS COMPASS CALIBRATION

1. Long press the GPS compass
calibration button. The lights on the
drone will flash.
3. Then hold the drone with the front
facing down, and rotate it anticlockwise
for 3 full revolutions. The lights at the
front of the drone will illuminate. The
lights will then return to the same
status as prior to calibration, indicating
that calibration has finished.
For accuracy the GPS should be calibrated before each flight, and we
would advise that the drone is at least 50cm away from the ground
during calibration.
2. With the drone level, rotate it
anticlockwise for 3 full
revolutions. The lights at the
rear of the drone will illuminate.
9 of 20