Mounting The Printer On A Vertical Surface; Installing The Optional Spill Guard - CognitiveTPG A799II User Manual

16 Chapter 3: Setting up the Printer
Mounting the printer on a vertical surface (using optional kit TPG-K260)
1 Select a location that allows adequate support for the printer and is within easy cable length of the host.
2 Follow the instructions provided with wall-mount kit
(K260) to attach the bracket to the vertical surface and
the printer to the bracket.
Caution: Attach the power and communication cables to
the printer prior to attaching the printer to the
bracket.
Note: The "paper low" option will not function when the
printer is vertically mounted.

Installing the optional Spill Guard

The spill guard provides added protection for your printer from moisture or spills.
To install the spill guard:
1 Open the printer receipt cover.
2 Align the tabs of the spill guard with the edges of both sides of the receipt cover.
3 Slide the spill guard along the edges and over the receipt cover until it snaps in place.
4 Close the cover. Print a sample to verify spill guard is properly installed.
Caution: Damage to spill guard may occur if removed improperly. Contact tech support for assistance.
A799II Two-Color Thermal Receipt Printer: User Guide
�������
Bracket
Power
Supply
Ty-Wrap
Cord
Ty-Wrap
Screws &
Anchors
��������
Bracket
Click!
A799-2UG0000 Rev. A
���������
Power
Supply
������� �������
Cord
09/2013