Example Of Encoder Interface Connections - Danfoss MCO 350 Operating Instructions Manual

Syncronising Controller MCO 350 Operating
Instructions
24 V, max load
8 V, max load
5 V, max load
Absolute encoder type
Maximum cable length
1) This is maximum load when only one supply voltage is used; when 2 or 3 supply voltages are
used simultaneously the load must be reduced accordingly. The following must be observed:
load24V + load8V + load5V ≤ 6W and load8V + load5V ≤ 2W.
2) 8 V is only available at terminal block X55.

2.6. Example of Encoder Interface connections

®
MG.33.Q1.02 - VLT is a registered Danfoss trademark
2. Introduction
1)
250 mA
1) 2)
250 mA
400 mA 1)
SSI
2
1)
150 m
19