Launch CReader 6011 User Manual page 3

Creader series
Hide thumbs Also See for CReader 6011:
Table of Contents

Advertisement

LAUNCH
Disclaimer
To take full advantage of the unit, you should be familiar with the engine.
 All information, illustrations, and specifications contained in this manual are
based on the latest information available at the time of publication. The right is
reserved to make change at any time without notice.
 Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or
third parties for damages, losses, costs or expenses incurred by purchaser or
third parties as a result of: accident, misuse, or abuse of this unit, or
unauthorized modifications, repairs, or alterations to this unit, or failure to
strictly comply with LAUNCH operating and maintenance instructions.
 LAUNCH shall not be liable for any damages or problems arising from the use
of any options or any consumable products other than those designated as
Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool, please read this
user's manual first carefully and observe the following safety precautions at a
minimum whenever working on a vehicle:
 Always perform automotive testing in a safe environment.
 Do not attempt to operate or observe the tool while driving a vehicle. Operating
or observing the tool will cause driver distraction and could cause a fatal
accident.
 Wear safety eye protection that meets ANSI standards.
 Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or
hot engine parts.
 Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
 Put blocks in front of the drive wheels and never leave the vehicle unattended
while running tests.
 Use extreme caution when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous voltages
when the engine is running.
 Put the transmission in P (for A/T) or N (for M/T) and make sure the parking
brake is engaged.
 Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
 Don't connect or disconnect any test equipment while the ignition is on or the
CReader Series English User's Manual
II

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents