Table of Contents
Advertisement
LAUNCH
(e.g. oil lamp reset etc.)
Select the desired reset
item (e.g. oil lamp reset
For CReader 8001/8011/8021, the resetting function is loaded with each single
vehicle model and can be done in process of the System Scanning operation.
Refer to the following illustration to proceed.
Select "Diagnose"
Select "Reset"
etc.)
Figure 5-6 (For CReader 7001/7001F/9081)
Figure 5-6 (For CReader 8001/8011/8021)
CReader Series English User's Manual
Follow the instructions
on the screen to operate
Select the service mode
(The available mode
varies from vehicle to
vehicle)
Select the car brand
18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CReader 6011 and is the answer not in the manual?
Questions and answers
как обновить лаунч 6011
To update the Launch CReader 6011, follow these steps:
1. Select Tool Information: Navigate to [Tool Information] and press [OK].
2. Obtain Register Code: The Register Code will be displayed. Note this code for later use.
3. Reopen CR Update Suite: Open the CR Update Suite and select the updates you want to install or click [Select All], then click [Download].
4. Power the Tool: Connect the device to a computer via USB or to a vehicle via the OBDII port.
5. Start Update: The tool will prompt for an upgrade. Click [OK] to start updating.
6. Wait for Completion: A progress bar will appear. The update may take several minutes if the file is large.
7. Finish: Once the update is complete, the registration and upgrade process is done.
This answer is automatically generated