Launch CReader 6011 User Manual page 17

Creader series
Hide thumbs Also See for CReader 6011:
Table of Contents

Advertisement

CReader Series English User's Manual
LAUNCH
Figure 4-2
1) Language
This option enables you to set the user interface language.
Note: Due to continuous software upgrade, language interface may differ from different
software versions.
2) Unit of Measure
This option allows you to set measurement unit.
3) Beeper
It is used to set On/Off the buzzer.
4) Record Mode
It is used to turn On/Off the data stream recording function.
Choose [Record Mode] and press [OK] to confirm. Press [OK] to switch between
On and Off. When recording is On, the
icon appears, and the tool can
record DTCs, data stream and freeze frames.
11

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CReader 6011 and is the answer not in the manual?

Questions and answers

константин
January 24, 2025

как обновить лаунч 6011

1 comments:
Mr. Anderson
February 10, 2025

To update the Launch CReader 6011, follow these steps:

1. Select Tool Information: Navigate to [Tool Information] and press [OK].
2. Obtain Register Code: The Register Code will be displayed. Note this code for later use.
3. Reopen CR Update Suite: Open the CR Update Suite and select the updates you want to install or click [Select All], then click [Download].
4. Power the Tool: Connect the device to a computer via USB or to a vehicle via the OBDII port.
5. Start Update: The tool will prompt for an upgrade. Click [OK] to start updating.
6. Wait for Completion: A progress bar will appear. The update may take several minutes if the file is large.
7. Finish: Once the update is complete, the registration and upgrade process is done.

This answer is automatically generated

Table of Contents