the User Manual of MVS Client Software for details.
2.2.1 Local Network Configuration
Steps:
1. Click Start -> Control Panel -> Network and Internet -> Network and Sharing
Center -> Change adapter settings, select the network connection and click
Properties.
2. Double click the TCP protocol, and you can set select Obtain an IP address
automatically.
3. (Optional) You can also select Use the following IP address, and set the IP
address as the same subnet with the camera.
4. Click OK to save the settings.
5. You also need to enable the jumbo frame of the NIC. For different operating
User Manual of Area Scan GigE Camera
Figure 2-1 IP Address Setting
37