Counter Control - HIKVISION MV-CA003-30GC User Manual

User Manual of Area Scan GigE Camera

3.8 Counter Control

The counter can divide frequencies that from external inputting trigger signal. You can
control the exposure depends on your expectations. Operation steps are as follows:
As shown in Figure 3-31, click Acquisition Burst Frame Count and select Trigger
Source. Choose Counter 0.
Figure 3-31 Trigger Source Configuration
As shown in Figure 3-32, click Counter And Timer Control and select external trigger
source which needs frequency division.
Figure 3-32 Counter Frequency Division Configuration
Note: By default, Line 0 is signal input pin. Line 2 is configurable input and output
pin. Configure Line 2 to input pin in Digital IO Control, as shown in Figure 3-33, in
order to do frequency division for Line 2.
63