User Parameter And Preference Setting; Parameters Saving And Loading - HIKVISION MV-CA003-30GC User Manual

User Manual of Area Scan GigE Camera
takes 4 bytes. Taking setting Packet Size 1500 and Packet Delay 400 as an example,
the actual network bandwidth is
BandWidth=(1500-36)/(1500+14+4+400)*1000Mbps=759.36 Mbps
The actual network bandwidth is smaller than the theoretical one because of the
network message, GVCP, GCSP leader, Trailer and any other overheads.
Set Packet Size (GEV SCPS Packet Size) value and Packet Delay (GEV SCPD) value
by using the slider and the input box. You can set these two parameters according to
the computer performance and the network card performance in the condition of no
data package loss, as shown in Figure 3-60.
Figure 3-60 Packet Size Setting And Packet Delay Setting

3.12 User Parameter and Preference Setting

3.12.1 Parameters Saving and Loading

The camera can save four groups of parameters, including one group of factory
parameter and three groups of configurable parameters. You can save currently
configured parameter and set corresponded default parameter when logging in at next
time in User Set Control in the attribute list.
Configuration method: Select one of the parameter names in the drop-down box in
User Set Selector. Save current parameter setting. In the drop-down box of User Set
81