Table of Contents
Advertisement
3
HIGH VOLTAGE CABLE AND ELECTRIC MOTOR
REMOVAL DIAGRAM
Item #
1
(4) Socket Head Screws
2
(2) Slotted Head Screws
3
High Voltage Cable Assembly
4
Switch
5
Gasket
6
Electric Motor Assembly
† When spraying plural component
materials, the filter assembly should be
cleaned as soon as possible after spray-
ing has been completed.
† Ransburg advises keeping extra paint
filter elements on hand. While one is be-
ing used, soak the other in the appropriate
solvent and change the filters out between
jobs.
AH-13-01.3
No. 2 Process Electric Motor Version - MAINTENANCE
Figure 17: High Voltage Cable and Electric motor Removal Diagram
(Figure 17)
NOTE
2
Description
CABLE/ ELETRIC MOTOR
ASSEMBLY
1. Remove the (4) socket head screws from the
rear of the applicator using a 9/64" hex key
wrench.
2. Remove the two slot headed screws from the
assembly.
3. Pull the high voltage cable assembly straight out
of the assembly. The spacer, the gasket and the
electric motor will also pull out of the barrel.
6
4
5
1
27
Advertisement
Table of Contents
