Pserver Setup (Netware Services) - Epson RIP Station 5100 Administrator's Manual

4
4-14 Using Fiery WebSetup
T PS S
O CONFIGURE ERVER ETUP
• Click the Service1 tab in the Network Setup window.
You can modify Bindery and NDS configurations from Fiery WebSetup. Turn on the
Enable NDS option if your network uses NetWare 4.x or 5.x in native mode. Click
Bindery Setup if your network uses NetWare 3.x, or uses NetWare 4.x or 5.x in
bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. Setting up NDS
N :
OTE
after Bindery will overwrite Bindery Setup. If your network uses both NDS and
Bindery, including using NetWare 4.x or 5.x servers in bindery emulation, the
RIP Station cannot service NDS and bindery emulation servers on the same NDS tree.

PServer Setup (NetWare Services)

The Enable PServer option must be turned on if you have a Novell server connected.
You can, however, change the PServer polling interval and then modify either Bindery
Setup or NDS Configuration.
The terms NetWare server, Novell server, and IPX server are in common use and
N :
OTE
are used here interchangeably to mean the server on an IPX network running Novell
NetWare networking software.
: