Epson RIP Station 5100 Administrator's Manual page 124

6
6-6 Administering the RIP Station
After this Setup screen:
Enter First Letters
of Server Name
(Network Setup>Service
Setup>PServer Setup>Bindery
Setup)
View Server List,
Edit Connection
(Network Setup>Service
Setup>PServer Setup>Bindery
Setup)
Add File Server
(Network Setup>Service
Setup>PServer Setup>Bindery
Setup)
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup>Service
Setup>PServer Setup>Bindery
Setup)
Any Bindery Setup screen
This message:
File server name not found.
Try again?
No file server is selected.
All connections used.
Remove server?
No NetWare print
server found.
Novell error code, followed by
a message.
Means:
No file server with those letters was found when
RIP Station queried the network. Check the name of the
NetWare file server, check cable connections, and make
sure the NetWare server is turned on.
No file server has been added in Bindery Setup.
You have added the maximum number of bindery servers,
which is eight. You now have the option of disconnecting
one of those servers, so as to add another.
No print server was found when RIP Station queried the
file server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle RIP Station print
jobs (see page 5-4).
Novell NetWare has reported an error. The Control Panel
reports the error number and displays a brief message.
For the most common errors (listed on page 6-8), a screen
is displayed that enables you to retry the action that evoked
the error, such as adding a server. If that is not possible, you
are prompted to notify the Novell administrator, who will
need to troubleshoot the network.
Consult NetWare Administrator documentation for
further explanation of Novell error codes.