Epson RIP Station 5100 Administrator's Manual page 125

6
6-7 Troubleshooting the RIP Station
In Network Setup, when you configure the IPX (Novell) connection, the RIP Station
queries the network for Novell file servers and trees, and attaches to them temporarily.
If a guest login is enabled, it will be used. If not, Network Setup prompts you to log in
to the NetWare file server from the RIP Station Control Panel.
If the selected NetWare file server or tree does not have a guest account, or if the guest
account has expired or has been disabled by the NetWare supervisor, you will be
prompted to notify the IPX (Novell) administrator. In that case, you (or the
supervisor) have two options:
• Enable a guest account on the NetWare server or tree for the purpose of setup.
• Log in with a different account. At the
name ( guest
prompted for a password, enter the correct password for the account you named.
For any Novell error, make sure:
• Your IPX (Novell) network is connected to the RIP Station.
• The NetWare server you are trying to access is running.
• The Novell network has been configured with at least one print server and queue for
the RIP Station.
• You have the appropriate permissions and login information, including username
and password, if necessary.
• The RIP Station is configured with the correct frame types for communication with
the desired Novell servers.
ENTER LOGIN NAME
) to supervisor or enter another valid login name. When you are
screen, change the default