Epson RIP Station 5100 Administrator's Manual page 43

3
3-9 Server Setup options
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM (Hours:Minutes). The time is used on the cover page and on Job Logs.
Print Start Page
Yes/No [No]
Specify whether the RIP Station should print a start page every time it is restarted. The
start page displays information about the RIP Station, including the server name,
current date and time, color mode, amount of memory installed in the RIP Station,
last calibration date, network protocols enabled, and connections published.
Use Character Set
Macintosh/DOS/Windows [Macintosh]
Specify whether the Control Panel should use the Macintosh, DOS, or Windows
character set for displaying filenames. This is important if filenames include accented
or composite characters (such as é, ü, or æ).
For mixed-platform networks, choose the option that gives the best overall
representation of the special characters you use.
Enable Printed Queue
Yes/No [Yes]
Specify whether to enable the Printed queue, which creates a storage location on the
RIP Station disk for recent jobs that were printed from the Print queue. Users with
Administrator or Operator access to the job management tools can reprint jobs from
the Printed queue without sending them to the RIP Station again. If you select No,
jobs are deleted from the RIP Station disk immediately after they are printed.
Jobs Saved in Printed Queue
1-99 [10]
This option appears only if
jobs to be stored in the Printed queue. Jobs in the Printed queue take up space on the
RIP Station hard disk. If disk space is low, use a smaller value for saved jobs.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.
is set to Yes. Specify the number of
Enable Printed Queue