Postscript Setup Options - Epson RIP Station 5100 Administrator's Manual

3

3-35 PostScript Setup options

T P
O ACCESS
1. In the main Setup menu, choose PS Setup.
PS Setup
Color Setup
2. Enter the options appropriate to the printing requirements at the site.
Job Log Setup
Change Password
Setup
3. When you have finished, save changes.
Parallel Connection
Print Queue/Direct Connection/Hold Queue [Print Queue]
Use this option to determine where jobs printed to the parallel port are sent. Only the
print connections that you published are displayed.
This option appears only if you selected Yes for the
Network Setup. If only one of the print connections is published, the
Connection option does not appear and parallel port jobs are automatically printed to
that connection.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.
PostScript Setup options
PS (PostScript) Setup options allow you to set defaults for both the RIP Station and
the printer. Most of these defaults can be overridden on a job-by-job basis. See the User
Guide for more information.
S S
OST CRIPT ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in square
brackets.
Color Mode
Color/Grayscale [Color]
Specify whether to print color or grayscale images to the RIP Station by default.
gives you full color prints.
Enable Parallel Port
:
converts all colors into shades of gray.
Grayscale
option in
Parallel
Color