Epson RIP Station 5100 Administrator's Manual page 63

3
3-29 Network Setup options
Network Setup
Service Setup
PServer Setup
Network Setup
Service Setup
Windows Setup
Polling Interval options
Polling Interval
Whether you are using NDS or Bindery services, choose Polling Interval from the
main PServer Setup menu. If you do not reset the interval, the default value of
15 seconds is used.
NetWare Server Poll Interval in Seconds
1-3600 [15]
Specify the interval, in seconds, at which the RIP Station communicates with the
Novell print server to see if there are print jobs waiting.
If you select a short interval, the amount of network traffic increases. This may
N :
OTE
slow down other network jobs.
Windows Setup options
Enable Windows Printing
Yes/No [No]
Enabling Windows Printing enables SMB (Server Message Block), the file and printer
sharing protocol built into Windows. Enabling SMB allows the RIP Station to be
listed on the network so that Windows clients can print to a particular print
connection (Hold, Print, or Direct) on the RIP Station without any other networking
software. For information on how to set up a Windows computer for Windows
printing, see the Setup Guide. Windows printing runs via TCP/IP, so TCP/IP must be
configured on the RIP Station and on all workstations that use Windows printing.