Epson RIP Station 5100 Administrator's Manual page 68

3
3-34 Performing Setup from the Control Panel
T P
O ACCESS
1. In the main Setup menu, choose Printer Setup.
Exit Setup
Server Setup
2. Enter the options appropriate to the printing requirements at the site.
Network Setup
Printer Setup
Setup
3. When you have finished, save changes.
S :
RINTER ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in square
brackets.
Publish Direct Connection
Yes/No [Yes]
This option enables users to print (or download) jobs to the RIP Station without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If users download fonts to the RIP Station, you must publish the Direct connection.
Publish Print Queue
Yes/No [Yes]
This option enables users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the RIP Station disk and printed on a first-in,
first-out basis. Only the print connections published in the Printer Setup are available
to users.
• To print to the RIP Station over a TCP/IP network, you must publish either (or
both) the Print queue and the Hold queue.
• To print to the RIP Station over the parallel port, you must publish a queue or
publish the Direct connection.
Publish Hold Queue
Yes/No [Yes]
Use this option to enable users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.