Epson RIP Station 5100 Administrator's Manual page 112

5
5-12 Setting up Network Servers
Configuring clients of a Windows NT 4.0 server
Each client of a Windows NT 4.0 server is already using a network protocol to
communicate with the server. Each client can print to the RIP Station if it has been
shared by a Windows NT 4.0 Server or Windows NT 4.0 Workstation computer. In
that case, the client does not have to use the same network protocol to connect to the
Windows NT 4.0 server as the server uses to communicate with the RIP Station.
T
O CONNECT AND PRINT TO THE
W NT 4.0
INDOWS SERVER
• For Windows NT 4.0 Workstation clients, before printing, connect to the print server
computer and select the RIP Station. Right-click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
After clients have selected the printer, they can choose it from the Print Setup, Page
Setup or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties are grayed and not available for changing. When a
client chooses Print, the job is transmitted to the Windows NT 4.0 print server, and
from there to the selected print connection on the RIP Station. The job is listed in the
Print Manager on the client workstation, and the administrator can track it in the
RIP Station window in the Print Manager on the Windows NT 4.0 print server.
RIP S
TATION SHARED BY THE
: