Configuring Video Loss - HIKVISION UD06695B User Manual

User Manual of Network Speed Dome
2. Check Enable checkbox to enable the tampering detection.
3. Click
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Section 5.2.1 Configuring Motion Detection.
4. Click
surveillance center, send email and trigger alarm output are selectable. Refer to Section 5.2.1
Configuring Motion Detection.
5. Click

5.2.3 Configuring Video Loss

Steps:
1. Enter the Video Loss setting interface:
Configuration > Event > Basic Event > Video Loss
© Hikvision
Figure 5-15 Tampering Alarm
tab to enter the arming schedule setting interface. The arming
tab to select the linkage method taken for tampering, notify
to save the settings.
45