Handling Exception; Smart Event Configuration - HIKVISION UD06695B User Manual

User Manual of Network Speed Dome

5.2.6 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and
illegal login to the cameras.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section 5.2.1
Configuring Motion Detection.
3. Click

5.3 Smart Event Configuration

The functions vary depending on different camera models.
© Hikvision
Figure 5-20 Exception Settings
to save the settings.
49