Maintenance - HIKVISION UD06695B User Manual

User Manual of Network Speed Dome
Steps:
1. Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS-485
2. Set the RS-485 parameters and click
The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the
same as those of the control device.
About
Click View License, you can check Open Source Software Licenses.

6.4.2 Maintenance

Upgrade & Maintenance
 Rebooting the Camera
Steps:
1. Enter the Maintenance interface:
2. Configuration > System > Maintenance > Upgrade & Maintenance:
3. Click
 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click
Clicking
© Hikvision
Figure 6-49 RS-485 Settings
to reboot the network camera.
or
restores all the parameters to default settings including the IP
to save the settings.
to restore the default settings.
99