Using The Statistical Utility; Configuring Cisco Rise In A Direct Mode Deployment - Cisco Nexus 7000 Series Configuration Manual

Remote integrated service engine for citrix netscaler appliances
Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

Configuring RISE

Using the Statistical Utility

The Dashboard is a browser-based application that displays charts and tables on which you can monitor
NetScaler performance.
To log onto Dashboard, follow these steps:
Step 1
Open your web browser and enter the NetScaler appliance's NSIP address as an HTTP address (http://<NSIP>). The
Citrix Logon page appears.
Step 2
In the User Name text box, enter nsroot.
Step 3
In the Password text box, enter the administrative password that you assigned to the nsroot account during the initial
configuration.
Step 4
In the Start in list, choose Dashboard and then choose Login.
For more information, see the Citrix eDoc,
listing page for NetScaler 10.1 at http://support.citrix.com/proddocs/topic/netscaler/ns-gen-netscaler10-1-wrapper-con.html.

Configuring Cisco RISE in a Direct Mode Deployment

In a direct mode deployment, the service appliance, such as Citrix Netscaler Application Delivery Controller
(ADC) appliance, is attached to a single Nexus Series switch. The switch can be standalone device or a VPC
peer (recommended deployment). The following figure shows the topology for a direct mode deployment for
a standalone Cisco Nexus switch.
Figure 6: Direct Connect Mode for the Appliance and a Standalone Switch
This task describes how to configure a standalone Cisco Nexus switch in a direct mode deployment. After
Note
configuring the Cisco Remote Integrated Services Engine (RISE) on the Cisco Nexus Series switch, the
appliance that is directly connected to the standalone switch is automatically configured for RISE mode
and all of its ports are in operation mode. No configuration is required on the appliance in a direct mode
deployment.
Accessing a Citrix
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuring Cisco RISE in a Direct Mode Deployment
NetScaler. To access Citrix eDocs, see the Citrix eDocs
Configuration Guide
21

Advertisement

Table of Contents
loading

Table of Contents