Troubleshooting The Rise Service On The Appliance - Cisco Nexus 7000 Series Configuration Manual

Troubleshooting RISE Integration

Troubleshooting the RISE Service on the Appliance

At the Citrix Netscaler Application Delivery Controller (ADC) CLI, enter the show rise profile command.
Displays RISE configuration status on the Citrix NetScaler Application Delivery Controller (ADC) appliance.
The output shows the state of the RISE service. The status field informs you whether the service is Inactive or Active.
If the service is Inactive, it means that the RISE channel was not established or is no longer connected.
RISE-mpx> show rise profile
1) ProfileName:
Mode:
VdcId:
Vlan:
Ifnum:
Done
profile_331 IPAddress:
Direct Status:
1 SlotNumber:
3 VlanGroupId:
LA/1
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Troubleshooting the RISE Service on the Appliance
3.101.0.10
Active
331
25
Configuration Guide
67