Verifying The Iscm Configuration - Cisco Nexus 7000 Series Configuration Manual

Configuring RISE
Done

Verifying the ISCM Configuration

To display the ISCM configuration on the Cisco Nexus Series switch, perform one of the following tasks.
For detailed information about the fields in the output from these commands, see the "Cisco NX-OS RISE
Note
Commands" chapter.
Command
show system internal ISCM rise version
show system internal ISCM pkt-stats
show system internal ISCM mem-stats
show system internal ISCM event-history
debugs[detail]
show system internal ISCM event-history-errors
show system internal ISCM event-history-all
show system internal ISCM event-history warnings
The following example is partial sample output from the show system internal ISCM rise version command:
switch#
Name
-------
ISCM
NAM3
MPX
Emu
VPX
vPC Id : 510
SUP IP : 172.16.0.3
VLAN : 301
VLAN Group : 1
ISSU : None
Interface : LA/1 : 10/7 10/8
show system internal iscm rise version
Version
---------
2.1
2.1
2.1
2.1
2.1
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Verifying the ISCM Configuration
Purpose
Displays the version of each service and version of
ISCM on the Cisco Nexus Series switch.
Displays all the statistics of the ISCM packet at
RX/TX on a rise socket on the Cisco Nexus Series
switch.
Displays VLAN group information for the NetScaler
appliance data VLANs on the Cisco Nexus Series
switch.
Displays the RISE running configuration on the Cisco
Nexus Series switch.
Displays troubleshooting information for RISE on
the Cisco Nexus Series switch.
Displays profile information for RISE on the Cisco
Nexus Series switch.
Displays profile information for RISE on the Cisco
Nexus Series switch.
Configuration Guide
41