Cisco Nexus 7000 Series Configuration Manual page 46

Configuring RISE in a vPC Indirect Mode Deployment
To prevent an attacker from impeding your ability to send packets to the appliance, choose a nonroutable
Note
IP address on your organization's LAN as your appliance IP address.
Before You Begin
Ensure that a port channel is configured on the appliance and that the appliance's physical ports are mapped
to this port channel.
Perform one of the following tasks:
Option
config ns
set ns config -ipaddress address -netmask netmask
add ns ip ip-address netmask -type type
add route network netmask gateway
save ns config
reboot
Example:
The following example shows how to configure the NSIP using the CLI:
set ns config -ipaddress 10.102.29.60 -netmask 255.255.255.0
add ns ip 10.102.29.61 255.255.255.0 -type snip
add route 0.0.0.0 0.0.0.0 10.102.29.1
save ns
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuration Guide
36
Description
Displays prompts for configuring the NSIP.
Configures the NSIP using the CLI.
Configuring RISE