Cisco Nexus 7000 Series Configuration Manual page 50

Verifying the RISE Configuration
Command
show tech-support services [detail]
The following example is partial sample output from the show rise command:
switch# show rise
Name
------------- ---- --- --------------- ------------ ---------
mpx205a
The following example is partial sample output from the show rise detail command:
swicth# show rise detail
RISE module name: mpx205a
State: active
Admin state: Enabled
Interface: Po2051
RISE Channel connectivity via interface Po2051
Mode: vpc
Slot id: 332
Service token: 0x2
Serial number: MH8C02AM50
SUP IP: 10.90.14.138
RISE IP: 10.90.14.216
VDC id: 2
VLAN: 99
VLAN group: 20
VLAN list: 99-101
Data Interface: N/A
To display the RISE configuration on the Citrix Netscaler Application Delivery Controller (ADC) appliance,
perform one of the following:
Command
show rise apbrsvc
The following example is sample output from the show rise profile command:
mpx24> show rise profile
1)
2)
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuration Guide
40
Slot Vdc Rise-Ip
Id Id
332 2 10.90.14.216
Service Name : mpx4
Status : Active
Mode : vPC-Direct
Device Id : FOC1824R00P
Slot Number : 300
VDC Id : 1
vPC Id : 510
SUP IP : 172.16.0.2
VLAN : 301
VLAN Group : 1
ISSU : None
Interface : LA/1 : 10/3 10/4
Service Name : mpx4
Status : Active
Mode : vPC-Direct
Device Id : FOC1751R0QV
Slot Number : 300
VDC Id : 1
Purpose
Displays troubleshooting information for RISE on
the Cisco Nexus Series switch.
State Interface
active Po2051
Purpose
Displays the RISE configuration status on the Citrix
Netscaler Application Delivery Controller (ADC)
appliance.
Configuring RISE