Table of Contents
Advertisement
It is possible to perform a physical reset to factory defaults using the reset button located on the underside of the
camera.
Resetting the Camera to Factory Default Settings Using the Reset Button
The reset button can be used to restore the camera to the factory default settings.
Note:
It is not possible to retain network settings, presets, patterns or sequences when using this procedure. If you need
to maintain these settings it is recommended to reset the camera using the GUI.
Reset the Camera to Factory Default Settings Using the Reset Button
Step Action
1
Locate the reset button on the underside of the camera.
2
Press and hold the reset button for at least 20 seconds.
3
Release the reset button.
It may take up to 2 minutes for the camera to restart.
Note:
It is also possible to reset the camera through the Maintenance tab located in the System menu.
Physical Reset of the Camera
- End -
15
Hide quick links:
Advertisement
Table of Contents
