Illustra Pro 12MP Fisheye Quick Start Manual page 15

3 Fold both ends of the desiccant bag under the bag.
4 Place the desiccant bag in the camera in the location indicated in the red circle in the image below.
Figure 12 : Desiccant bag placement location (left side) Desiccant bag in the camera (right side)
5 Place the top cover on the camera and secure both screws.
Note:To help provide maximum protection against condensation you should replace the desiccant bag
each time you remove the top cover.
10
Figure 11 : Ends folded under the bag
Illustra Pro 12MP Fisheye Quick Start Guide