Table of Contents
Advertisement
• Set IP addresses to DHCP
• Configure IP settings and rename cameras
• Upload firmware to individual or selectable group of cameras
• Set date and time or direct the cameras to a specific NTP server
• Assign user name and password
• Uses icons common to victor unified client to display camera status
• Compatible with Illustra IP cameras
Discovering the Illustra Camera
The following information states how to install and access the camera.
lllustra Connect
The following information states how to install and access the camera on your network using the Illustra Connect
discovery tool.
Illustra Connect enables automatic discovery of compliant devices on IP networks and is the recommended
method for installation and detection of the camera on the network.
Discovering the Illustra Camera using Illustra Connect
Step Action
1
Connect the camera to the computer or network which will be used for the configuration and power on.
The camera will begin its initial boot up sequence which will take approximately 1 to 2 minutes. Out of the
box, or when using a DHCP Server the camera will automatically be assigned a Network IP address.
2
Install the Illustra Connect software that is provided with the camera. Refer to the Illustra Connect
manual for more information.
3
When the installation is complete, run Illustra Connect. It will search the network and display all devices.
4
Select the camera you wish to configure, locating it by its unique MAC address. Illustra Connect allows
basic configuration of the camera. Refer to the Illustra Connect manual for more information.
5
Right-click the camera and select Launch Web GUI Configuration.
Configure the Illustra Camera using DHCP Server Logs
Step Action
1
Connect the camera to the computer or network which will be used for the configuration and power on.
The camera will begin its initial boot up sequence which will take approximately 1 to 2 minutes.
2
Out of the box or when using a DHCP Server the camera will automatically be assigned a Network IP
Address.
3
View the DHCP Server system logs and make note of the IP address assigned to the camera.
13
- End -
Illustra Pro 12MP Fisheye Quick Start Guide
Hide quick links:
Advertisement
Table of Contents
