Table 3-2: Operator-Supplied Tools
Level bar
Percussion drill
and drill heads
5mm L-shaped
Allen wrench
3.4 Software
As part of finishing the base station installation process, you will need a computer to log in
and verify that the base station status is reported as active by:
•
Using a local Ethernet connection to the base station or a Web browser to access the
base station GUI client application; or
•
Accessing the internet to reach the cloud-based OMC application.
3.5 Form Factor
The Nova-227 base station has a sleek form factor: 9.8 in (H) x 9.8 in (W) x 3.2 in (D) / 248mm
(H) x 248mm (W) x 80mm (D). It weighs only 4.4 lbs (2 kg).
Figure 3-1 shows the side LED indicators and interface. The LEDs are explained in Table 3-3,
and the interface is described in Table 3-4.
Marking pen
Hammer
Cross screw driver
Torx screw-
T7 screwdriver
driver
Knife
Pliers
Cable vice (crimper) Tape measure
Cable Stripper
head
11
Wrench