Alvarion BreezeACCESS VL 5.4 System Manual page 95

Operation and Administration
The allowed range is from -11 to 29 (dBm), using a 1 dBm resolution.
The default value is 4 (dBm).
ATPC Parameters in AU
ATPC Option
The ATPC Option enables or disables the Automatic Transmit Power
Control (ATPC) algorithm.
The default is Enable.
Minimum SNR Level
The Minimum SNR Level defines the lowest SNR at which you want each
SU to be received at the AU (the lower limit of the optimal reception level
range).
Available values: 15 to 40 (dB).
Default value: 25 (dB).
Maximum SNR Level
The Maximum SNR Level defines the highest SNR at which you want each
SU to be received at the AU (the higher limit of the optimal reception level
range).
Available values: 15 to 40 (dB).
Default value: 30 (dB).
SNR Memory Factor
The SNR Memory Factor defines the weight of history (value of last
calculated average SNR) in the formula used for calculating the average
SNR. The higher the value of this parameter, the higher is the weight of
history in the formula.
Available values: -1 to 32. -1 is for no weight for history, meaning that
average SNR equals the last measured SNR.
Default value: 5
Minimum Interval Between ATPC Messages
The Minimum Interval Between ATPC Messages parameter sets the
minimal time between consecutive power-up/power-down messages to a
specific SU. Setting a low value for this parameter may lead to a higher
5-35